Cold Fog - Atomizing Systems, IncAtomizing Systems Inc.

                                             Manufacturer of Cold Fog® Systems
Call: 888-COLDFOG                                        printer-friendlyprinter-friendly page  |  send this page forward this page  |   request free proposal  

About Pump Stations


High-pressure Fog Pump Module (Enclosed or Open-frame)

  PUMP
  STATIONS 
FLOW RATE NOZZLE
QTY*
PRESSURE
(PSI)
MOTOR
(HP)
SIZE (INCH)
L x W x H
(GPM) (LPM)
      CF-3 0.33-1.45 1.25 -5.5 55 1000 1/2 to 1.5 28 x 18 x 19
      CF-6 1.43 - 6.10 5.4 - 23.1 230 1000 1.5 to 7.5 33 x 22 x 20
      CF-10 6.10 to 8.65 23 to 30 330 1000 7.5 to 10 36 x 22 x 20
      CF-16 8.0 to 15.0 30 to 56 570 1000 10 to 15 40 x 24 x 20
      CF-25 16.0 to 25.0 60 to 95 960 1000 15 to 20 50 x 30 x 24
      CF-35 25 - 36 95 - 136 1,380 1000 20 to 30 50 x 30 x 24
      CF-40 35 - 45 132- 170 1,730 1000 30 to 40 50 x 30 x 24
Note: Nozzle quantity is based on ASI-6R nozzle at operating pressure 1000 psi.

 


Standard CF-3 Compact Pump Station - New

Standard CF-6 Pump Station
   

Standard CF-16 Pump Station

Standard CF-25 Pump Station
 

High pressure pump stations up to 3000 psi (206 bar) and multi-pumps skid are available.


Two Pump Inertia Skid

Three Pump Skid
Atomizing Systems Home | Fog Applications | ColdFog® Products | Fog Tech Center | Location and Directions | Legal Disclaimer
BROCHURES: Brochure IBM | Brochure CF3
Copyright © 1998-2010Atomizing Systems, Inc.*
One Hollywood Avenue, Ho-Ho-Kus, NJ 07423-1433, USA
Ph: 201.447.1222   F: 201.447.6932  Toll Free: 888.COLDFOG (265.3364)
E-mail: info@coldfog.com
Copyright: © 1998-2010 Atomizing Systems, Inc., Ho-Ho-Kus, NJ.  All rights reserved.  The text, pictures, video files, audio files and artwork on the Atomizing Systems Inc website are all subject to copyright and other intellectual property protection.  The websites may also contain images to which copyright is attributable to third parties. Reproduction or transmission, in whole or in part, of any material contained within the site is prohibited without prior written permission of Atomizing Systems Inc.  Modification or redistribution of any material to third parties in any form or by any means is also forbidden.
Trademarks: Atomizing Systems Inc (logo or word) and the nozzle (device) are registered trademarks of Atomizing Systems Inc.  These trademarks cannot be used, modified, downloaded, copied or distributed in any way or by any means in the absence of the express prior written permission of Atomizing Systems Inc., 1 Hollywood Avenue, Ho-Ho-Kus, NJ 07423, USA, and in this case under the express condition that the authorization is clearly stated and/or is a part of an authorized download, copy or transmission or material from this website.